SYNTHESIS OF CONDUCTIVE POLYANILINE VIA OXIDATION BY MnO2

A unique process of chemical oxidation polymerization of aniline using manganese dioxide (MnO2) as the oxidizing agent in an aqueous medium is described. The reaction between aniline and MnO2 follows a mechanism by which the organic monomer is oxidized while the metal oxide undergoes reductive dissolution. The effects of the amount of oxidizing agent and aniline, pH and temperature of the reactive system, type of acid on the yield and conductivity of polyaniline are discussed. The resulting polyaniline was characterized by [R and UV-Vis spectrometry. Polyaniline with a conductivity of 12.5 S/cm was obtained using 0.033 tool of aniline oxidized by 0.023 tool MnO2 in the presence of 100 mL of 2.7 mol/L HCI at 25℃ for 4 h.     

Minimization of mass interferences in quadrupole inductively coupled plasma mass spectrometric (ICP-MS) determination of palladium using a flow injection on-line displacement solid-phase extraction protocol

A flow injection on-line displacement solid-phase extraction protocol was employed to minimize mass interferences with determination of palladium by inductively coupled plasma mass spectrometry (ICP-MS). The developed method involved in on-line complexing of Ag⁺ with pyrrolidine dithiocarbamate (PDC), presorption of the resultant Ag–PDC onto a microcolumn packed with the cigarette filter, displacement sorption of Pd²⁺ through loading the sample solution onto the microcolumn due to on-line displacement reaction between Pd²⁺ and the presorbed Ag–PDC, elution of the retained Pd²⁺ with 50 μL of ethanol for on-line ICP-MS detection. Interferences from co-existing heavy metal ions with lower stability of their PDC complexes relative to Ag–PDC were minimized/eliminated. No interferences from 5 mg L^− 1 Zn and 3 mg L^− 1 Pb for ¹⁰⁴Pd, 0.4 mg L^− 1 Cu for ¹⁰⁵Pd, 6 mg L^− 1 Zn and 2 mg L^− 1 Cd for ¹⁰⁶Pd, 6 mg L^− 1 Zn and 3 mg L^− 1 Cd for ¹⁰⁸Pd, and 2 mg L^− 1 Cd for ¹¹⁰Pd were observed for the determination of 100 ng L^− 1 Pd. The enhancement factors of 71–75, sample throughput of 23 samples h^− 1 and detection limits of 2.8–3.5 ng L^− 1 were achieved with the consumption of 3.0 mL of sample solution. The precision (RSD) for eleven replicate determinations of Pd at the 100 ng L^− 1 level was 1.8–2.7%. The developed method was applied to the determination of palladium in rock samples.     

Chiral base-catalyzed aldol reaction of trimethoxysilyl enol ethers: effect of water as an additive on stereoselectivities

An aldol reaction of trimethoxysilyl enol ether catalyzed by lithium binaphtholate is described. The aldol reaction of trimethoxysilyl enol ether derived from cyclohexanone under anhydrous conditions predominantly afforded the anti-aldol adduct with moderate enantioselectivity, whereas the reaction under aqueous conditions predominantly resulted in the syn-adduct and the enantioselectivity of the syn-adduct was considerably improved. The best enantioselectivity was obtained in the reaction of trimethoxysilyl enol ether derived from 1-indanone with cyclohexanecarboxaldehyde (97% ee (syn)). This is the first example of an aldol reaction of trimethoxysilyl enol ether catalyzed by a chiral base.     

Determination of levodopa methyl ester and its metabolites in rat serum by CZE with amperometric detection

A reliable and reproducible method, capillary zone electrophoresis with amperometric detection (CZE–AD), has been developed for separation and quantification of levodopa methyl ester (LDME) and its biotransformation products levodopa (L-DOPA) and dopamine (DA) in rat serum. A carbon-disk electrode was used as working electrode. The optimum conditions for CZE detection were 50 mmol L^–1 phosphate solution at pH 7.0 as running buffer, 17 kV as separation voltage, 1.0 V (vs Ag/AgCl, 3.0 mol L^–1) as detection potential, and sample injection for 8 s at 17 kV. The linear ranges were from 2.4×10^–2 to 2.2 g mL^–1 for LDME, 2.9×10^–1 to 49.5 g mL^–1 for L-DOPA, and 1.4×10^–2 to 1.5 g mL^–1 for DA with correlation coefficients of 0.9997, 0.9994, and 0.9999, respectively. The detection limits for LDME, L-DOPA, and DA were 14.6, 98.0, and 9.7 ng mL^–1, respectively. Recoveries were 80.3% for LDME, 93.5% for L-DOPA, and 86.5% for DA. This method was applied to serum samples after intravenous injection of LDME and L-DOPA to rats.     

烷基紫精/五氧化二钒插层化合物的组装、表征及磁性的研究

以烷基紫精(alkylviologens; 又称紫精或紫罗精)为有机客体、层状五氧化二钒为无机主体, 在液、固两相反应体系中, 利用I^－与V^5＋的氧化还原反应, 使烷基紫精阳离子通过静电引力作用进入被还原的五氧化二钒层板之间, 形成一系列新颖的无机-有机插层化合物. 并运用X射线粉末衍射(XRD)、红外(FT-IR)、X射线光电子能谱(XPS)、紫外-可见漫反射(UV-vis DRS)等方法对其进行了表征. XRD分析结果证明, 五氧化二钒的层间距随着烷基紫精中烷基链的增长而增大, 但其结晶度随着烷基紫精阳离子中烷基链的增加而降低. XPS研究表明, 该类材料中的钒是以V^4＋和V^5＋两种混合价态存在, 氧原子处于三种不同的化学环境, 这些现象说明烷基紫精阳离子的引入对五氧化二钒的骨架结构影响不大, 主体五氧化二钒的层状结构保存完好; 氮原子处于两种不同的化学环境, 证实插层化合物中主客体之间相互修饰的协同效应, 有可能起到了稳定客体分子激发态的作用, 同时FT-IR光谱中芳香环特征谱带强度的变化也进一步证明了这一结论. UV-vis DRS分析发现由于主客体的相互作用使插层化合物在紫外和可见光区域产生特殊的光吸收性质. 从磁性研究的结果可以看出, 在温度低于15 K时, 插层化合物RV2为反铁磁性的有序结构; 当温度高于15 K时, 转变为顺磁性, 表现出磁无序结构.     

CuZnAl水滑石衍生催化剂上甲醇水蒸气重整制氢Ⅰ. 催化剂焙烧温度的影响

 以类层柱CuZnAl水滑石为前体,经不同温度焙烧制备了一系列甲醇水蒸气重整制氢催化剂. 在250 ℃、 水/甲醇比1.3和重时空速2.5 h-1下的反应结果表明, 600 ℃焙烧的催化剂具有优异的活性和稳定性,而≤500 ℃和≥700 ℃焙烧后的催化剂活性较差. 热重、 X射线衍射、 傅里叶变换红外光谱和程序升温还原分析结果表明, 600 ℃焙烧时水滑石分解较为完全,析出纳米CuO粒子的同时伴生CuAl2O4尖晶石相,进而在反应过程中对金属Cu纳米粒子和ZnO起到良好的隔离和稳定作用. 焙烧温度≥700 ℃时CuO纳米粒子发生二次团聚,同时CuAl2O4尖晶石相大量生成,造成催化活性位减少,活性较低; 而焙烧温度≤500 ℃时水滑石分解不完全,生成 (Cu,Zn)AlxOy(CO3)z复合物且无尖晶石相伴生,造成反应中金属Cu纳米粒子和ZnO聚集,导致催化剂活性较低.     

硫的发展与应用

硫是一种非金属元素，属于氧族元素（ⅥA族）。硫的发现和使用具有悠久的历史，现代化学中含硫生命分子、含硫药物、含硫材料、精细化学品等都十分普遍。从硫元素的发展历史出发，逐步介绍硫化学在人类生活中的重要用途。重点介绍当代硫化学在生命功能、药物作用、食品和有机光电材料中的重要用途，尤其是生活中常见的含硫药物、含硫食品和含硫材料的主要成分以及它们独特性质的化学本源。     

消旋反式菊酸α—氰基—4—氟—3—苯氧基苄酯的合成

含氟拟除虫菊酯的合成是近年来新型高效拟除虫菊酯研究工作的方向之一。该类化合物由于具有高效、低毒、广谱、低残留、无致癌、致畸作用,有的还具有低鱼毒,杀螨的特性,因此倍受注目。西德拜尔公司开发的百治菊酯(Baythroid)(1)便是其中一种高效杀虫剂。     

An electrochemical DNA hybridization detection assay based on a silver nanoparticle label

A novel, sensitive electrochemical DNA hybridization detection assay, using silver nanoparticles as the oligonucleotide labeling tag, is described. The assay relies on the hybridization of the target DNA with the silver nanoparticle-oligonucleotide DNA probe, followed by the release of the silver metal atoms anchored on the hybrids by oxidative metal dissolution and the indirect determination of the solubilized Ag(I) ions by anodic stripping voltammetry (ASV) at a carbon fiber ultramicroelectrode. The influence of the relevant experimental variables, including the surface coverage of the target oligonucleotide, the duration of the silver dissolution steps and the parameters of the electrochemical stripping measurement of the silver(I) ions, is examined and optimized. The combination of the remarkable sensitivity of the stripping metal analysis at the microelectrode with the large number of silver(I) ions released from each DNA hybrid allows detection at levels as low as 0.5 pmol L(-1) of the target oligonucleotides.